Home > News > Content

Product Categories

Galvanized Barbed Wire Construction Steps
Jun 16, 2017

Galvanized Barbed Wire What are the steps in the construction of steel wire mesh?

1, first of all according to the size of the design drawings required to pay off the line, and the location of the relevant units by the relevant units of inspection;

2, should be reinforced parts of the concrete surface grinding treatment, the use of grinding machine on the concrete surface grinding, destroyed the floating layer, Galvanized Barbed Wire exposed the original concrete structure of the new surface. Repair of sag and defective parts.

3, according to the size of the positioning line with the size of the wire mesh and the direction of force cut into the corresponding size;

4, according to the requirements of reinforcement drawings, the need for reinforcement of the site of the wire mesh paving, the use of standardized methods and special fixed parts of the wire mesh parts fixed;

5, with the air machine to strengthen the construction site to clean up, remove the dust on the concrete surface and the construction of the dust left to keep clean, so that follow-up construction more convenient.

Simple summary of steel wire construction steps is

Positioning line, inspection line → concrete surface treatment (grinding, repair, etc.) → wire mesh cutting → steel mesh paving, fixed → base surface dust cleaning

Galvanized wire is the use of cold-drawn low-carbon steel wire after galvanizing process of production of metal monofilament, according to the different galvanized process is divided into hot-dip galvanized wire and galvanized wire (cold galvanized wire). The hot-plating process is that the steel wire is immersed in the molten zinc solution to realize the coating, and the production process is faster than the electroplating process, the zinc content is large and the corrosion resistance is good, but the coating is uneven and the color is dark; the plating process is through the wire In the electrolysis to achieve the coating, Galvanized Barbed Wire relative to the hot-dip process production slow, small amount of zinc and poor corrosion resistance, but the coating uniform, the appearance of light. Galvanized iron wire due to low cost and good corrosion resistance and other characteristics, Galvanized Barbed Wire widely used in construction, handicrafts, screen preparation, product packaging and other industrial civilian areas.

Galvanized wire processing technology is divided into hot-dip plating and plating (cold plating). Hot-plating process for the wire through the 430 to 460 degrees high temperature melting state of the galvanized pool to complete the zinc liquid in the steel wire surface coating, Galvanized Barbed Wire and then finished by the completion of the production line, including helicopter and ramp up two, And by controlling the speed control on the amount of zinc. Electroplating process is in the plating tank through the current unidirectional so that zinc gradually coated with the surface of the wire process, in order to ensure the quality of galvanized, usually before and after the addition of a washing process, mainly used to remove the surface of impurities before electrolysis and removal of electrolysis After the wire surface residual plating.